Each turf installation is unique, so the process may vary slightly. However, this is the process you may usually expect. Please feel free to ask our Project Manager if you have questions during the installation.
Artificial turf installation is a process that can vary slightly depending on the company you use. However, there are some general steps that are usually followed. First, the area where the turf will be installed is prepared. This usually involves removing any existing grass or vegetation. Next, the ground is leveled to ensure a smooth surface. Once the area is prepared, the turf is laid down in rolls and secured in place. Finally, the seams between the rolls are sealed and infill is added to help support the blades of grass. The entire process usually takes a few days to complete and results in a lush, green lawn that requires little maintenance. Artificial turf is a great option for homeowners in Scottsdale, Mesa, Gilbert, Chandler, San Tan Valley, Paradise Valley, Tempe, and Queen Creek, AZ who want to enjoy a beautiful lawn without all the work.
-
1
Remove existing grass or rock (if necessary)
We must remove all grass and rock that may make your ground unleveled.
-
2
Curbing or edging is installed (if necessary)
This can be great if you want separation or border between separate turf areas. This is useful for rocks adjacent to your grass itself
-
3
Cap off existing sprinkler lines (if necessary)
Sprinklers won't be needed if you have some we will cap them off for you
-
4
Spray area to deter grass regrowth (if grass was removed)
If you have previous grass we will spray the area to stop them from regrowing
-
5
Place cloth weed barrier over area
If your yard regularly grows weeds it will be a good idea to add a cloth weed barrier to prevent them from sneaking through
-
6
Install decomposed granite (DG)
This provides an excellent foundation to your grass to insure the most of your investment
-
7
Compact DG
We will compact your DG to be smooth and level for a leveled installation
-
8
Install turf or putting green
We add your new turf to your yard
-
9
Finish seams (if applicable)
We may have to finish up the seams of your grass to appear more fluid
-
10
Hand chisel edges of turf (nails may be used when appropriate)
There may be some eding of adjustments needed to achieve the best looking turf
-
11
Place infill on grass (combination of sand and recycled rubber or synthetic infill)
This is for filling any gaps if they are seen
-
12
Rake and power-broom infill into place
Removing any debris or other means on your new turf
-
13
Clean Up
Final touch ups to your new yard so you can enjoy